寺河矿4301大采高超长工作面支架选型研究
秦小云
（山西晋城无烟煤矿业集团有限责任公司寺河煤矿，山西 沁水 048205）
摘要： 为了探究大采高超长工作面液压支架适应性特征，以寺河矿4301 工作面为工程背景，综合运用理论分析、现
场实测的方式针对ZY12000/28/62D 型掩护式支架的适应性进行了探究。结果表明，支架承载特性与工作面来压规律保持
一致，均表现为中部受力大、两端受力小的特点，支架最大工作阻力未达到额定强度，支护强度也小于开采冲击载荷，
应用后工作面资源回收率提高了6%，经济效益1.6×108元，各项经济技术指标均满足工作面生产要求。
关键词： 大采高超长工作面；掩护式支架；经济效益
中图分类号： TD355     文献标志码： A     文章编号： 2095-0802-(2020)09-0032-02
Research on Support Selection of 4301 Super Long Working Face with Large Mining Height in
Sihe Coal Mine
QIN Xiaoyun
(Sihe Coal Mine, Jincheng Anthracite Mining Group Co., Ltd. of Shanxi, Qinshui 048205, Shanxi, China)
Abstract: In order to explore the adaptability characteristics of hydraulic support in the super long working face with large
mining height, taking 4301 working face of Sihe Coal Mine as the engineering background, this paper explored the adaptability of
ZY12000/28/62D type shield support by means of theoretical analysis and field measurement. The results showed that the bearing
characteristics of the support were consistent with the pressure law of the working face, showing the characteristics of large force
in the middle and small force at both ends. The maximum working resistance of the support did not reach the rated strength, and
the support strength was less than the mining impact load. After application, the resource recovery rate of the working face was
increased by 6%, and the economic benefit was 1.6伊108 yuan, all the economic and technical indexes met the production requirements
of the working face.

Key words: super long working face with large mining height; shield support; economic benefit