七元煤业深埋巷道合理支护参数研究
尚立斌
（阳泉煤业集团七元煤业有限责任公司，山西 寿阳 045499）
摘要：为确定七元煤业深埋巷道的合理支护参数，对其附近的地应力进行了实测，根据地应力实测数据施加
FLAC^3D模型初始应力，模拟得出合理的锚杆间距为900 mm，排距为800 mm，锚杆和锚索均垂直安装，锚索长度
为5 300 mm。现场应用结果表明，采用设计的支护方案后，巷道整体变形量较小，满足矿井安全高效生产需求。
关键词：大埋深；巷道；支护参数；数值模拟
中图分类号：TD35      文献标志码：A      文章编号：2095-0802-(2024)01-0177-05
Reasonable Support Parameters for Deep Buried Roadways in Qiyuan Coal
Industry Co., Ltd.
SHANG Libin
(Qiyuan Coal Industry Co., Ltd., Yangquan Coal Industry Group, Shouyang 045499, Shanxi, China)
Abstract: In order to determine the reasonable support parameters for the deep buried roadway of Qiyuan Coal Industry
Co., Ltd., the ground stress near the roadway was measured. Based on the measured data of ground stress, the initial stress
of the FLAC^3D model was applied. The simulation showed that the reasonable anchor rod spacing was 900 mm, the row
spacing was 800 mm, and both the anchor rods and cables were installed vertically with a cable length of 5 300 mm. The
on-site application results show that after adopting the designed support scheme, the overall deformation of the tunnel is
small, meeting the requirements of safe and efficient production in the mine.
Key words: large embedded depth; roadway; support parameters; numerical simulation